[NSRCA-discussion] Electric newbee question...

[Ihncheol Park]

John,
 
Is the battery from Commonsense RC?
Depending on connectors, some of them has wires just soldered to the pins
and each one of then can be carefully pull out of the connector.  With a #11
blade tip, you can also pull the wires out of the balancer connectors on
some of batteries
 
You should be able to find a balancer connector converter or can make them
with one female that fits on the pack and one male that matches the
charger/balancer you have.
 
Ihncheol

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Ferrell
Sent: Sunday, June 22, 2008 2:23 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] Electric newbee question...


I bought a heli (Align-Trex 450) from one fellow that uses 3S-2100 mah
LiPo's and an airplane from another guy that uses the same batteries
(ThunderPower). 
The balance connectors are a little different in size but it appears to me
that the wiring is exactly opposite between the two. 
 
Is the common practice simply to fabricate/buy an adapter cable to charge
them?
 
John Ferrell    W8CCW
 
"All that is necessary for the triumph of evil is for good men to do
nothing." -- Edmund Burke
http://DixieNC.US

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080622/03971119/attachment.html>