[NSRCA-discussion] voltage regulator

[Claude Weimer]

Thanks for the information Mike. I plan to make it to the contest on the
28th.

 

Claude

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of mike mueller
Sent: Wednesday, June 11, 2008 12:26 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] voltage regulator

 


 Claude they are really heavy and clunky. I had a wire break on one of mine
2 years ago probably from vibration. I got lucky that it happened on the
ground. So I'd say there are a lot better ones on the market. 

 I've seen guys running the new Castle Creations adjustable regulators with
great success. They are a bargain at $20. I'm using the Jaccio's 5.7 now and
they are flawless. Mike

--- On Wed, 6/11/08, Claude Weimer <cweimer at tconl.com> wrote:

From: Claude Weimer <cweimer at tconl.com>
Subject: Re: [NSRCA-discussion] voltage regulator
To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, June 11, 2008, 12:05 PM

Is there an opinion about Mpi Regulators from Maxx Products? I have a couple
of them that I have never used. Regulators make me a little nervous because
it is another thing in the system that could go bad.
  
Claude
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dwayne Brown
Sent: Wednesday, June 11, 2008 11:50 AM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] voltage regulator
 
Jaccio regulators have always worked well for me and I like to support Mr.
Oddino.  Dwayne
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Troy Newman
Sent: Tuesday, June 10, 2008 9:53 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] voltage regulator
 
Any of the above will work fine.
 
I personally like the 5.1V regs from Jaccio. But either radio system
will not care on any of the 3 choices you have there. Some of the Futaba
servos are rated as 4.8V only so this may affect your decision. But if
you choose JR servos they can run unregulated 5cell packs just fine. SO
any of the voltage choices are good on JR servos.
 
 
Troy Newman
 
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jerry
Wilson
Sent: Tuesday, June 10, 2008 7:26 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] voltage regulator
 
Which voltage regulator (Jaccio) should be used with a 5 cell 6 volt
receiver pack?  There are three sizes: 5.1, 5.7, and 6.0 volt
 
Thanks,
Jerry
 
 
 
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 
No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.100 / Virus Database: 270.2.0/1494 - Release Date: 6/10/2008
7:22 AM
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080611/b18d7d00/attachment-0001.html>