[NSRCA-discussion] voltage regulator

Chad Northeast chadnortheast at shaw.ca
Wed Jun 11 05:31:09 AKDT 2008


Ditto on the tech-aero regs.  I have been using them in my Integral at 6.2V on a 2s lipo rx pack.  They seem very well built and being able to adjust them is a really nice feature.  

Chad

----- Original Message -----
From: jzeigenfus at comcast.net
Date: Wednesday, June 11, 2008 6:47 am
Subject: Re: [NSRCA-discussion] voltage regulator
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>

> I'm running the Tech Aero regulators at 6.0V with two 480 
> Thunder power batteries with no issues and works great. I have 
> an electric set up so without the vibration the 480's last at 
> least 8 flights before recharging. Highly recommend the 
> regulators. Light and bullet proof. JEZ
> 
> -------------- Original message -------------- 
> From: "John Pavlick" <jpavlick at idseng.com> 
> 
> I'm running a pair of Tech Aero adjustable regulators set at 
> 6.0V drawing power from a pair of Thunder Power 730mAh 2S LiPos 
> (redundant system). I have all Futaba gear (including servos). 
> Works great. Lasts long time. You try, you like. :)
> 
> John Pavlick
> 
> BTW - Tech Aero products are assembled entirely in the USA.
> ----- Original Message ----- 
> From: Ed Alt 
> To: General pattern discussion 
> Sent: Tuesday, June 10, 2008 11:08 PM
> Subject: Re: [NSRCA-discussion] voltage regulator
> 
> 
> Jerry:
> You might want to take a look at http://www.tech-aero.net/  
>  
> It's a family of programmable, failsafe switch regulators.  
> They can be factory set or programmed yourself from 5.75 to 
> 6.65V, or by request, a different voltage range (higher or lower 
> can be built).  Whatever range you have, it is self 
> programmable with 32 separate steps within the 0.9V adjustment 
> range.  The programmer is available on the website, or you 
> can just use a digital voltmeter and a spare servo extension to 
> set the voltage without buying the programmer.  Very 
> easy!  If interested, I can explain how to program it with 
> a scrap servo extension.
>  
> Ed
> 
> > From: jcwilsonjr at comcast.net
> > To: nsrca-discussion at lists.nsrca.org
> > Date: Tue, 10 Jun 2008 21:26:20 -0500
> > Subject: [NSRCA-discussion] voltage regulator
> > 
> > Which voltage regulator (Jaccio) should be used with a 5 cell 
> 6 volt
> > receiver pack? There are three sizes: 5.1, 5.7, and 6.0 volt
> > 
> > Thanks,
> > Jerry
> > 
> > 
> > 
> > 
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> 
> 
> Instantly invite friends from Facebook and other social networks 
> to join you on Windows Live™ Messenger. Invite friends now! 
> 
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080611/b4579015/attachment.html>


More information about the NSRCA-discussion mailing list