[NSRCA-discussion] voltage regulator

[Troy Newman]

Any of the above will work fine.

I personally like the 5.1V regs from Jaccio. But either radio system
will not care on any of the 3 choices you have there. Some of the Futaba
servos are rated as 4.8V only so this may affect your decision. But if
you choose JR servos they can run unregulated 5cell packs just fine. SO
any of the voltage choices are good on JR servos.


Troy Newman


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jerry
Wilson
Sent: Tuesday, June 10, 2008 7:26 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] voltage regulator

Which voltage regulator (Jaccio) should be used with a 5 cell 6 volt
receiver pack?  There are three sizes: 5.1, 5.7, and 6.0 volt

Thanks,
Jerry




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion