[NSRCA-discussion] YS-160 round 1...ding, ding

[krishlan fitzsimmons]

JB Weld a $700 motor? Yikeez... 


Chris 
 
 
 

--- On Sun, 6/1/08, Mike Hester <kerlock at comcast.net> wrote:

From: Mike Hester <kerlock at comcast.net>
Subject: Re: [NSRCA-discussion] YS-160 round 1...ding, ding
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Sunday, June 1, 2008, 7:34 AM

You mean the check valve? It is press fit. It swivels =)

As long as it's not loose, it's fine. Sometimes the fitting comes loose
from 
the head where it's just pressed in. If that's the case, JB weld. But
the 
black part just presses on to that.

if you mean the part that attaches on to the pushrod tubes, it's just 
plastic and if it's moving excessively, something might have broken.

-Mike

----- Original Message ----- 
From: "JShulman" <jshulman at cfl.rr.com>
To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, June 01, 2008 10:12 AM
Subject: [NSRCA-discussion] YS-160 round 1...ding, ding


> Sooooooooooo.... how do we tighten up the regulator (black piece at valve 
> cover) on the top of the motor? It seems that this one has
> come loose as it will swivel back and forth.
>
> BTW Chris... I am still flying electric <G>
>
> Regards,
> Jason
> www.jasonshulman.com
> www.shulmanaviation.com
> www.composite-arf.com
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.24.4/1476 - Release Date: 5/31/2008

> 12:25 PM
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
>
> E-mail message checked by Spyware Doctor (5.5.0.178)
> Database version: 5.09950
> http://www.pctools.com/spyware-doctor/ 





E-mail message checked by Spyware Doctor (5.5.0.178)
Database version: 5.09950
http://www.pctools.com/spyware-doctor/
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080601/3610c273/attachment-0001.html