[NSRCA-discussion] Incidence Meter

[J N Hiller]

Interesting, I reset my left wing today also. It was off about 1/2 turn on
the adjuster. They were previously set with the old Robart meter. A couple
beeps of trim got me back to straight and level. Nice tool. I like it.
Jim Hiller

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of James Oddino
Sent: Wednesday, July 09, 2008 3:50 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Incidence Meter

Got my Wixey and today I reset my left wing incidence.  I'm sure I'll
be the best pattern flyer on my block now.

Jim O

On Jul 8, 2008, at 12:01 PM, J N Hiller wrote:

> I got my Wixey digital angle gauge yesterday. Here is the mount I
> made to
> check or set control travel. I epoxied a steel strip to a 1/4 x 38
> stick
> that replaces one of the cloths pin legs and added a swivel foot to
> the
> other one to prevent dents in the control surfaces.
> See attached photo.
> Jim Hiller
> <120-2008_IMGa.JPG>_______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion