[NSRCA-discussion] Incidence Meter

[Jerry Stebbins]

Jim, my photo is very vague---actually non- existant.
Jerry
----- Original Message ----- 
From: <glmiller3 at suddenlink.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, July 08, 2008 5:00 PM
Subject: Re: [NSRCA-discussion] Incidence Meter


> Very Nice, Jim!
> 
> G
> ---- J N Hiller <jnhiller at earthlink.net> wrote: 
> 
> =============
> I got my Wixey digital angle gauge yesterday. Here is the mount I made to
> check or set control travel. I epoxied a steel strip to a 1/4 x 38 stick
> that replaces one of the cloths pin legs and added a swivel foot to the
> other one to prevent dents in the control surfaces.
> See attached photo.
> Jim Hiller
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion