[NSRCA-discussion] Futaba FASST System

[Jay Marshall]

The potential problem is only with the 6EX, 7C and TM-7.

Jay Marshall

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Stuart Chale
Sent: Sunday, January 27, 2008 12:14 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Futaba FASST System

According to Futaba the 12's and 14 have the code in the TX not the module.
It is unique and supposedly will not reset to 0's
Stuart C

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of William C.
Harden
Sent: Sunday, January 27, 2008 11:30 AM
To: chad at f3acanada.org; 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Futaba FASST System

Does anyone know if the 2.4 GHz 12FG radio will have the unique code stored
in the TX or in the module?  I am wondering if the 12FG radio will also have
the unique code reset problem.

>From what I am reading on the list is that the 12Z and 14MZ have the unique
code stored in the TX and not the module, so the problem of resetting the
code shouldn't follow these two radios.

Bill

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion