[NSRCA-discussion] Aileron lead holes

[Todd Schmidt]

Vern,  I cut a 1/2" w by 3/8"d trough in the top of the wing but stop about 2" from the wing root. I then angle a hole from the middle of the airfoil to the trough.  

Todd Schmidt
  ----- Original Message ----- 
  From: Verne Koester 
  To: NSRCA 
  Sent: Sunday, January 06, 2008 6:07 PM
  Subject: [NSRCA-discussion] Aileron lead holes


  I'm looking for alternate ways to bore the aileron lead hole in a foam wing core. In the past, I've done it with 1/2" sharpened brass tubing. Anybody got a better way?

  Thanks,
  Verne


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080107/9fb187e5/attachment.html