[NSRCA-discussion] Hatori pipe

[Rex LESHER]

Thanks Troy....  Exactly what we needed to know!

Rex
  ----- Original Message ----- 
  From: Troy A. Newman<mailto:troy_newman at msn.com> 
  To: NSRCA Mailing List<mailto:nsrca-discussion at lists.nsrca.org> 
  Sent: Monday, December 31, 2007 11:52 PM
  Subject: Re: [NSRCA-discussion] Hatori pipe


  Pretty restrictive. I don't recommend it. It will run but temps will tend to run higher and you'll need to run smaller props. Like 16.5-12W and 16-13 or the likes. Don't try to turn any of the big props it will over heat

  its also quite a bit louder...works better on the 110 and 120's than on the 160 or 170

  Troy Newman



    ----- Original Message ----- 
    From: Rex LESHER<mailto:trexlesh at msn.com> 
    To: NSRCA-discussion<mailto:NSRCA-discussion at lists.nsrca.org> 
    Sent: Monday, December 31, 2007 5:51 PM
    Subject: [NSRCA-discussion] Hatori pipe


    Guys

    I've got a friend that wants to know what the experience is between running the Hatori
    #725 vs #821 on a YS170...   He is going to use the 170, but doesn't really have the 
    room for the bigger muffler without carving the fuse...

    Thanks

    Rex Lesher


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080101/b6bd63b5/attachment-0001.html