[NSRCA-discussion] Removing crud from exhaust headers

[John Pavlick]

I've used "gasket remover" from the automotive parts store. They sell it in aerosol cans. Check the label - some brands are not safe for aluminum but most are since many new cars have aluminum heads. Spray it on, let it sit for a wile then brush with an old toothbrush and rinse it off. Repeat if necessary. 

John Pavlick
http://www.idseng.com

----- Original Message ----- 
  From: Ed Alt 
  To: General pattern discussion 
  Sent: Wednesday, December 31, 2008 8:54 PM
  Subject: [NSRCA-discussion] Removing crud from exhaust headers


  Is there a chemical that can be purchased that will remove the baked on crud on glow engines and aluminum exhaust headers?  I used something once that was available in a hobby shop and it worked, but it was expensive stuff.  

  Thanks
  Ed


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090101/9a50dd3d/attachment.html>