[NSRCA-discussion] X9303 2.4GHz Gimbal Wire Bulletin

[Keith Black]

Troy, do you know if this is also an issue with the 12X?

Keith Black

----- Original Message ----- 
From: "Troy A. Newman" <troy_newman at msn.com>
To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, August 19, 2008 6:40 PM
Subject: [NSRCA-discussion] X9303 2.4GHz Gimbal Wire Bulletin


> Guys,
>
> I just wanted to let you know. Horizon Hobby and JR took quick response 
> and
> action regarding the X9303 aileron gimbal question.
>
> I just received this notice and felt it important to share with you.
>
> JR has released a bulletin with instructions to solve the problem with the
> link below.
>
> One note is that this is only the X9303 2.4 DSM system that has the issue.
> It takes lots of wear to damage the wires.
>
> There have been some photos of systems with frayed wires on the various
> websites. Its an easy fix. I just pulled my X9303 and took care of it. My
> system has about 200-300 flights on it. It only showed a very small mark 
> on
> the wire insulation. Other systems have shown larger amounts of wear in 
> this
> amount of flying.  Takes about 5 mins. Very easy to do.
>
> http://www.jrradios.com/Articles/Article.aspx?ArticleID=1822
>
> If you have one of these systems and have a question regarding this 
> bulletin
> or your gimbals wires have been worn through to the bare wire please 
> contact
> Horizon's Customer support the details and contact information is in the
> bulletin.
>
>
> Thanks to Horizon Hobby and JR for their quick response and solution to a
> potential problem.
>
> Troy Newman
> Team JR
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion