[NSRCA-discussion] K&B Primer

[rcmaster199 at aol.com]

Primer and/or bedding coats used for glass or carbon mat, thinning with 
MEK or lacquer thinner from cheapo depot work fine. For top coats, 
slower evaporation of the solvent gives a better finish, so a solvent 
formulated for epoxy paints is better.

MattK

-----Original Message-----
From: Richard Kent <rkent58 at gmail.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Fri, 15 Aug 2008 9:47 am
Subject: Re: [NSRCA-discussion] K&B Primer

I used to use straight MEK with it with no problems.

On Thu, Aug 14, 2008 at 10:39 AM, Dave Burton &lt;burtona at atmc.net&gt; 
wrote:















DeVoe paint store, T-10 epoxy reducer.


 






From:
nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Claude
Weimer

Sent: Thursday, August 14, 2008 10:40 AM

To: 'General pattern discussion'

Subject: [NSRCA-discussion] K&B Primer






 


I
have some two part K&B primer but I don't the thinner. Can someone
tell me what type of thinner I can use with this primer?


 


Claude







_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
htt
p://lists.nsrca.org/mailman/listinfo/nsrca-discussion