[NSRCA-discussion] Kraft info

[adriancwong at earthlink.net]

Wow, Kraft Signature Series, my dad still have his. Hang on to it, Jerry.

Adrian

-----Original Message-----
>From: Jerry Stebbins <JAStebbins at worldnet.att.net>
>Sent: Aug 3, 2008 10:07 PM
>To: Discussion -NSRCA <nsrca-discussion at lists.nsrca.org>
>Subject: [NSRCA-discussion] Kraft info
>
>I bought a Tiger Tail III many years ago that was built way back, and has nose and wing retracts. It has Kraft servos and Rx, and  a Signature  Series  Kraft Transmitter with it on CH 04, stickered in 1993.
>Radio was built as a Custom model in March, 1978
>I am  replacing the Rx and Tx batteries.
>Several questions I need some help on.
>1. Where can I find some 4 pin connectors to make up adapters if I need to use a different TX and RX--my old Ham license is long gone..
>2. Where can I find some kind of a Manual on the Radio.This plane has retracts on the nose gear and wing gear, 2 servos on the throttle, normal Ail/Rudder/Elev. setup for the time built. 
>3. Where can I find xtals to convert to a regular channel.
>Engine is an OPS 60 almost new-very good shape-and I am cleaning it up to use.
>Plane was flown several times --too fast for the builder, so it went in the ceiling in the basement until I found it.
>My intent was to kit the version (III) and I built a plug for the fuse and canopy, and layed out the planforms and airfoils. Then building and kitting the 2 meter planes got priority. 
>Fixing it up for Ballistic Pattern--
>Thanks for any info--
>Jerry