[NSRCA-discussion] Aluminum fuel lines

[flyintexan at comcast.net]

Gray,

what about 20 minute, will that work?



-------------- Original message -------------- 
From: Gray E Fowler <gfowler at raytheon.com> 

Epoxy...NOT 5 or 15 minute.




Gray Fowler
Senior Principal Chemical Engineer
Radomes and Specialty Apertures
Technical Staff Composites Engineering
Raytheon 


John Konneker <jlkonn at hotmail.com> 
Sent by: nsrca-discussion-bounces at lists.f3a.us 
04/16/2008 06:41 AM Please respond to
NSRCA Mailing List <nsrca-discussion at lists.f3a.us>

ToDiscussion List <nsrca-discussion at lists.f3a.us> 
cc
Subject[NSRCA-discussion] Aluminum fuel lines







I have finally reached the point all the mods I wanted to do to last year's Focus are complete.
Now the reassembly.
In one of many attempts to reduce the planes weight I want to shorten my fuel lines by moving my fuel dots and also by substituting
aluminum tubing for fuel line where I can on the long runs.  What's the best way to anchor the aluminum?  Glue balsa standoff blocks to the
fuse sides and run the tubing through the blocks?  What kind of adhesive will hold the best since I am sure some small amount of surface
oxidation will occur causing some glues to work better than others.
Thanks!
JLK_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080416/7a30496d/attachment-0001.html 
-------------- next part --------------
An embedded message was scrubbed...
From: Gray E Fowler <gfowler at raytheon.com>
Subject: Re: [NSRCA-discussion] Aluminum fuel lines
Date: Wed, 16 Apr 2008 13:15:04 +0000
Size: 699
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080416/7a30496d/attachment-0001.mht