[NSRCA-discussion] Method of mounting wheel pants

[Matthew Frederick]

Well, at least you have a good sense of humor about it!
  ----- Original Message ----- 
  From: Rex 
  To: NSRCA Mailing List 
  Sent: Thursday, April 03, 2008 11:17 PM
  Subject: Re: [NSRCA-discussion] Method of mounting wheel pants


  He does!  And at my expense!
   
  Rex






----------------------------------------------------------------------------
    From: mjfrederick at cox.net
    To: nsrca-discussion at lists.nsrca.org
    Date: Thu, 3 Apr 2008 22:20:42 -0500
    Subject: Re: [NSRCA-discussion] Method of mounting wheel pants


    I hope for your sake you realize how funny that statement is...
      ----- Original Message ----- 
      From: Dennis Cone 
      To: 'NSRCA Mailing List' 
      Sent: Thursday, April 03, 2008 2:22 PM
      Subject: Re: [NSRCA-discussion] Method of mounting wheel pants


      Because of this mounting method, Rex has not been able to get his pants off for years.



      DC




--------------------------------------------------------------------------

      From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Rex
      Sent: Wednesday, April 02, 2008 6:55 PM
      To: NSRCA Mailing List
      Subject: Re: [NSRCA-discussion] Method of mounting wheel pants



      John
       
      I just glue mine together...   If you break the wheel pant, just grind the remainder off and glue another set
      on...  Pretty simple.  I usually use epoxy, but the last set, I used Elmer's Ultimate Glue (Probond).  I use the 
      lightweight aluminum axles from Central, drill the leg and pant... assemble the parts with glue between the 
      pant and gear leg.  After I adjust the attitude of the pant, I simply tighten the axle bolt and let it dry.  You 
      cant get any lighter than that!  I've been doing this for years, and haven't had any problems.
       
      Rex






--------------------------------------------------------------------------

      From: jpavlick at idseng.com
      To: nsrca-discussion at lists.nsrca.org
      Date: Wed, 2 Apr 2008 20:33:17 -0400
      Subject: [NSRCA-discussion] Method of mounting wheel pants

      I'm looking for a light, reliable method to mount wheels and wheel pants on carbon fiber landing gear legs. Any suggestions?



      John Pavlick
      http://www.idseng.com


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080405/a8634088/attachment.html