[NSRCA-discussion] Inegral

[colin chariandy]

I'm still putting mine together, but nothing horrible has come up thus far.
   
  Wings and Stabs fit OK...one wing panel needed 1/2degree adjustment to be the same as the other and the stab tube is a bit loose it will need some building up with CA. They fogot the hardpoints for the stab screws and the balsa block in the rudder for the horn is a bit small. I also think that the gelcoat is a bit thick and brittle in some areas. When sanded it tends to break up at the edges so that you have to fill and re-sand. Oh...and the controls surfaces don't slide under the lower panel skin as well they should...again, some additional work was required. There are also some minor quality issues...like the left wing and stab panels are finished differently to the rights.
   
  Again...nothing major but there is alot of room for improvement.
   
  Hope this helps
  Colin.

"R. LIPRIE" <RLIPRIE at centurytel.net> wrote:
          Could someone give me a quick evaluation on the Integral ?  Of how you like the flight characteristics, and assembly.  
   
  Also where I could buy one at?
   
  Thanks: Matthew Liprie
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

       
---------------------------------
Ask a question on any topic and get answers from real people. Go to Yahoo! Answers. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070914/08c7de64/attachment.html