[NSRCA-discussion] Futaba 9z with Spektrum SPMMSFUT7

[JShulman]

OK, I misunderstood what you had written at first. I don't have a single
case to check the 9Z in, but it does fit in the double case, even with it's
4" tall divider. It probably will not fit as it is in a single case without
some change to the foam.

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Ihncheol Park
Sent: Thursday, September 06, 2007 11:42 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Futaba 9z with Spektrum SPMMSFUT7


Jason,

The module plugs into the back of the radio.  It's just that the antenna
connectors are the things that causes un-necessaary caution.
I posted the pictures at RCU Pattern Forum

http://www.rcuniverse.com/forum/m_6337454/tm.htm

I will try to add more picturs later when I finish adding foams (if I can
find thick enough foams) to the case.
I think Futaba module may need to change the entire foam to keep the radio
in.  Doesn't it?

Ihncheol

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of JShulman
Sent: Thursday, September 06, 2007 11:34 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Futaba 9z with Spektrum SPMMSFUT7

So you don't just plug it in to the back of the radio like a standard
module?

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Ihncheol Park
Sent: Thursday, September 06, 2007 11:16 PM
To: 'NSRCA Mailing List'
Subject: [NSRCA-discussion] Futaba 9z with Spektrum SPMMSFUT7



I just finished installing the module on the 9Z.
Who want the pictures?  Couple of megabytes for all pictures.

I am not sure if I can make a couple of pictures small enough to be as
attachment in several messages.
Manual does not tell you how to install the module on 9Z, so I took pictures
of the installations in sequences. 18 pictures with some of them showing the
side views after the installation.  You need to remove the antenna & the
connector from the module to put the radio back to 9Z case.
I may add some foams to the case to keep the backside of the radio higher
inside the case so that the connector on module doesn't touch the case.
Hope I can test fly tomorrow.

Ihncheol


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.7/992 - Release Date: 9/6/2007
8:36 AM

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.7/992 - Release Date: 9/6/2007
8:36 AM


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.7/992 - Release Date: 9/6/2007
8:36 AM

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.7/992 - Release Date: 9/6/2007
8:36 AM