[NSRCA-discussion] Futaba FASST module label pic

[Bob Richards]

As I understand it, part of the 2.4 ghz band allocated in France has limited power output. I believe the "France" switch restricts the module to the higher power part of the 2.4ghz frequency band. Other information I have read states that this switch limits power to 10mw. Perhaps someone with a spectrum analyzer could check this out.
   
  Interestingly, I found this document doing a search:
  http://www.ezurio.com/files/00646.pdf
   
  That explains the CE! marking in the manual for my 6EX.
   
  Bob R.
  

Ihncheol Park <pnahobbies at sbcglobal.net> wrote:
    Jason,
   
  Thank you for the picture.  Not easy to take the picture of small area right? :P
  What France has to do with the module?
  Does it send different signal or change the RX channel line-up?
  Which Radio(s) have you tested so far?
   
  Ihncheol Park
  

JShulman <jshulman at cfl.rr.com> wrote:
      Here is a pic of the label. Don't mind my steady hand... 
   
  Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070905/a97e8ae3/attachment.html