[NSRCA-discussion] Nelson Hobby Paint

[rcmaster199 at aol.com]

Have you tried spraying a coat of Imron or Concept clear over the latex acrylic? What's the compatibility like?


 


MattK










-----Original Message-----

From: John Pavlick 

To: NSRCA Mailing List 

Sent: Tue, Sep 4 12:07 AM

Subject: Re: [NSRCA-discussion] Nelson Hobby Paint









I've used it too. I like it for all the reasons Scott described and I also noticed the issue with the gloss. I wet sand the clear with 400 then 1200 followed by coarse and fine compound then Liquid Glass wax. It's OK but not what I would call a "wet" look. I haven't tried just shooting a final coat of clear and leaving it alone. That might be the trick.


 


John Pavlick

http://www.idseng.com


 



----- Original Message ----- 


From: Scott Smith 


To: 'NSRCA Mailing List' 


Sent: Saturday, September 01, 2007 5:45 AM


Subject: Re: [NSRCA-discussion] Nelson Hobby Paint









I’ve done four 2 meter planes with this paint.  As for durability, it is a VERY tough finish.  (It took me days to sand the finish off a recycled canopy!)  Use the cross linker and you will not have any problems with fuel.


 


The weight is very light, but that all depends on the painter.  


 


One thing you can’t do is “600 wet sand” the base.  The paint bonds mechanically and so it needs some ‘tooth’ to adhere to.  (That info is in the instructions, do read them!)  


 


Clean up is a breeze and there’s no odor while spraying.  The primer works very well and sands easily once cured (allow a couple days.)  


 


All in all, lot’s of advantages.  Only one drawback that I saw…it’s a very dull finish (even with several coats of the clear gloss.)  The paint is so tough that hand buffing has little affect.


 


BTY, the paint is repackaged from System Three so more info can be found at www.systemthree.com (Looks like they just came out with a new high gloss product!)     


 









From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Gayer

Sent: Friday, August 31, 2007 8:17 PM

To: NSRCA Mailing List

Subject: Re: [NSRCA-discussion] Metal Servo Arms



 
Has anyone used the water soluble Nelson Hobby paint?

  How is it for durability and weight?

  John

  

  _______________________________________________NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion







_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________  NSRCA-discussion mailing list  NSRCA-discussion at lists.nsrca.org  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  


________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070904/97914c4d/attachment.html