[NSRCA-discussion] OS 120 AX

Bob Richards bob at toprudder.com
Mon Sep 3 21:01:47 AKDT 2007


I have it in a Venus II. When I got the engine running good today, and started to fly some of the old Masters schedule, I told my son that this plane flys as well as my old Finesse. Very good and inexpensive combo, I would recommend it in a heartbeat to anyone wanted to get started, I think it would be competitive up through the Advanced class easily.
   
  I bought this for my son, who has expressed interest in flying pattern. We may try to make one contest this year with it.
   
  Bob R.
  

John Pavlick <jpavlick at idseng.com> wrote:
  Yeah it will idle at least as slow if not slower than my 160. What a great 
motor! Here's an idea to save pattern from an untimely death:
Slightly smaller airplanes that fly with a muffled 120 Ax...

John Pavlick
http://www.idseng.com

----- Original Message ----- 
From: "Jay Marshall" 

To: "'NSRCA Mailing List'" 
Sent: Monday, September 03, 2007 11:00 AM
Subject: Re: [NSRCA-discussion] OS 120 AX


> Started breaking mine in today with 15% Cool Power and a 15x10 prop. 
> Started
> right up and turned 8820 RPM if leaned out. Idles WAY down, but not
> measured.
>
> Jay Marshall
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
> randy9004 at comcast.net
> Sent: Monday, September 03, 2007 10:01 AM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] OS 120 AX
>
> I use any 15% two stroke fuel. The APC 16X8 seems like a good prop to me.
> RPM - enough to reach the moon straight up.
>
> randy
>
>
> -------------- Original message ----------------------
> From: Bob Richards 
>> I acquired a plane with an OS 120AX installed, and seem to be having some
> issues
>> with it. It came with an APC 16x8 prop and stock muffler. Is not running
> as well
>> as I think it should, but I did figure out I had some bad fuel. I plan to
> go out
>> again today and tinker with it some more.
>>
>> What fuel, prop, and what rpm figures should I be seeing?
>>
>> Thanks in advance.
>>
>> Bob R.
>>
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070904/b74231a5/attachment.html 


More information about the NSRCA-discussion mailing list