[NSRCA-discussion] OS 120 AX

John Pavlick jpavlick at idseng.com
Mon Sep 3 20:10:05 AKDT 2007


Yup - it should make weight easily.

John Pavlick
http://www.idseng.com
  ----- Original Message ----- 
  From: DaveL322 at comcast.net 
  To: NSRCA Mailing List 
  Sent: Tuesday, September 04, 2007 12:03 AM
  Subject: Re: [NSRCA-discussion] OS 120 AX


  Can I keep my 10s lipo powered Hacker?  <G>

  Dave

    -------------- Original message -------------- 
    From: "John Pavlick" <jpavlick at idseng.com> 

    > Yeah it will idle at least as slow if not slower than my 160. What a great 
    > motor! Here's an idea to save pattern from an untimely death: 
    > Slightly smaller airplanes that fly with a muffled 120 Ax... 
    > 
    > John Pavlick 
    > http://www.idseng.com 
    > 
    > ----- Original Message ----- 
    > From: "Jay Marshall" 
    > To: "'NSRCA Mailing List'" 
    > Sent: Monday, September 03, 2007 11:00 AM 
    > Subject: Re: [NSRCA-discussion] OS 120 AX 
    > 
    > 
    > > Started breaking mine in today with 15% Cool Power and a 15x10 prop. 
    > > Started 
    > > right up and turned 8820 RPM if leaned out. Idles WAY down, but not 
    > > measured. 
    > &g! t; 
    > > Jay Marshall 
    > > 
    > > -----Original Message----- 
    > > From: nsrca-discussion-bounces at lists.nsrca.org 
    > > [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of 
    > > randy9004 at comcast.net 
    > > Sent: Monday, September 03, 2007 10:01 AM 
    > > To: NSRCA Mailing List 
    > > Subject: Re: [NSRCA-discussion] OS 120 AX 
    > > 
    > > I use any 15% two stroke fuel. The APC 16X8 seems like a good prop to me. 
    > > RPM - enough to reach the moon straight up. 
    > > 
    > > randy 
    > > 
    > > 
    > > -------------- Original message ---------------------- 
    > > From: Bob Richards 
    > >> I acquired a plane with an OS 120AX installed, and seem to be having some 
    > > issues 
    > >> with it. It came with an APC 16x8 prop and stock muffler. Is not running 
    > > as well 
    > >> a! s I thi nk it should, but I did figure out I had some bad fuel. I plan to 
    > > go out 
    > >> again today and tinker with it some more. 
    > >> 
    > >> What fuel, prop, and what rpm figures should I be seeing? 
    > >> 
    > >> Thanks in advance. 
    > >> 
    > >> Bob R. 
    > >> 
    > > 
    > > 
    > > 
    > > _______________________________________________ 
    > > NSRCA-discussion mailing list 
    > > NSRCA-discussion at lists.nsrca.org 
    > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
    > 
    > _______________________________________________ 
    > NSRCA-discussion mailing list 
    > NSRCA-discussion at lists.nsrca.org 
    > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070904/ca5e3a69/attachment.html 


More information about the NSRCA-discussion mailing list