[NSRCA-discussion] Judging Snaps & spins II

wgalligan wgalligan at texasairnet.com
Tue Oct 23 06:03:01 AKDT 2007


Earl...   this is a post I was going to send yesterday also.  Kind of supports what your saying.

Seems if it really was a good snap that the airplane would naturally be slightly off track at the end of the snap from the original heading.  SO... in theory... if the airplane was right on track after the snap then it must of been either 1) cheated on the entry or exit   or 2) not really snapped.

Wayne Galligan
  ----- Original Message ----- 
  From: Earl Haury 
  To: Discussion List, NSRCA 
  Sent: Tuesday, October 23, 2007 7:26 AM
  Subject: [NSRCA-discussion] Judging Snaps & spins II


  Posted this as a reply yesterday but it got snagged as too long with the ongoing thread attached - started a new thread.

  Jim

  Don't think that'll work very well. Let's take the analogy of a car moving in a straight line slowly - turn the steering quickly and the car will turn - changing "track". Do the same thing at high speed and the car will skid - track stays mostly the same and only attitude changes. Entering a snap is similar - establish a "skid". In both cases there will be a minimal departure from the original line until "traction" is lost and the skid occurs. Consider that the faster the pitch input the less AOA increase will be needed before rudder application. This is where we get into trouble trying to define a "break" into a snap, some visualize this as needing to be huge while, in reality, it may only be a few degrees. 

  Also - with regard to the departure from track before the "skid". F3A rules require a "separation from the flight path" and AMA rules allow it "track closely maintains the flight path". Numerous things will define the amount of "separation" including rapidity of pitch / yaw, mass of airplane, wing loading, etc. The separation may be a few inches to a couple of feet and is not to be downgraded as long as the aircraft "closely maintains" track. So - if the snap (skid) progresses more or less parallel to but slightly offset (maybe in both pitch & yaw) it's not only OK, but a pretty good indicator that the snap isn't an axial roll.

  Use the description to think through set-up and control inputs. Recognize that a properly done snap entry takes only a fraction of a second (if you have time to see exactly what's going on you'll be getting downgrades for track changes). With the proper set-up and practice a snap entry can be perfect almost every time - that just leaves the exit to deal with. Finish wings level and enjoy the 10!

  Earl


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion





Internet and Web Mail supplied by Texas Air Net.
Texas Air Net can be reached at postmaster at texasairnet.com
or
http://www.texasairnet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071023/65993794/attachment.html 


More information about the NSRCA-discussion mailing list