[NSRCA-discussion] Aileron Servoes

[J N Hiller]

Has anyone static balanced the flying surfaces?
 Jim Hiller

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Gene Maurice
Sent: Thursday, October 18, 2007 6:49 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Aileron Servoes

All,

I really appreciate the feed back. It looks like the consensus is "Not good
for ailerons on glow power". Oh BTW it will be glow power, OS160.

  _____

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Joe Lachowski
Sent: Thursday, October 18, 2007 5:32 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Aileron Servoes
3421SA's



  _____

From: pcosky at comcast.net
To: nsrca-discussion at lists.nsrca.org
Date: Thu, 18 Oct 2007 17:38:33 -0400
Subject: Re: [NSRCA-discussion] Aileron Servoes
Are telling me I should use a DEPS system instead of my 9650s in my two V2s?
----- Original Message -----
From: Mike Hester <mailto:kerlock at comcast.net>
To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>
Sent: Thursday, October 18, 2007 12:22 PM
Subject: Re: [NSRCA-discussion] Aileron Servoes

My opinion:

Might be ok for electric, it's probably borderline for a 4 stroke. Those
servos have some slop in them when they're brand new, and they get bad fast.
They work very well for elevator and throttle servos, but the elevator usage
you have to replace the gears pretty often. It's not too difficult and the
gears are cheap.

As for ailerons....well, I still like the JR 9411SA the best. Trouble is
they're always out of stock!

-Mike

----- Original Message -----
From: Gene Maurice <mailto:gene.maurice at sgmservice.com>
To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org>
Sent: Thursday, October 18, 2007 11:59 AM
Subject: [NSRCA-discussion] Aileron Servoes

Does anyone have any experience with the Futaba s9650 servos on ailerons??
The specs look good, .11 sec. / 62.5 oz./in. @6.0v and only .9 oz. for $50.
I'm a die hard JR servo fan but like I said, the spec and price look pretty
good.
  _____


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  _____


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _____

Peek-a-boo FREE Tricks & Treats for You! Get 'em!
<http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071019/50ba1c91/attachment-0001.html