[NSRCA-discussion] Problem JR10 X Battery Cassette

[vicenterc at comcast.net]

Thanks Ed.  I know how to solder electronic components.  I could replaced myself.  Anyone knows where to buy this small fuse and the specs?

Thanks,

--
Vicente "Vince" Bortone

-------------- Original message -------------- 
From: "Ed Alt" <ed_alt at hotmail.com> 

It’s a blown fuse Vince.  This sometimes happens because of a temporary short when plugging or unplugging the charge jack, especially if using an aftermarket adapter.  You can either send it in or if handy with a soldering iron and if you can find the part locally, replace it yourself.  It’s a dumb design that requires the user to send equipment in for “repair” because of a blown fuse, but there it is.  Great radio otherwise.

Ed

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of vicenterc at comcast.net
Sent: Thursday, October 18, 2007 6:52 PM
To: NSRCA NSRCA
Subject: [NSRCA-discussion] Problem JR10 X Battery Cassette

I am having problems with one of my batteries.  The radio works but the battery does not want to charge.  I checked and there is a circuit board with just one component.  It appears a resistor or something similar.  I think that is the bad component but not sure now.  I just want to check if someone out there had similar problem and solved.

Thanks,

--
Vicente "Vince" Bortone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071019/fc8591b9/attachment.html 
-------------- next part --------------
An embedded message was scrubbed...
From: "Ed Alt" <ed_alt at hotmail.com>
Subject: Re: [NSRCA-discussion] Problem JR10 X Battery Cassette
Date: Fri, 19 Oct 2007 00:01:22 +0000
Size: 717
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071019/fc8591b9/attachment.mht