[NSRCA-discussion] Epoxy Question Smooth n Easy

[ronlock at comcast.net]

Ive used that epoxy and process several times - works fine.
Ron Lockhart

-------------- Original message -------------- 
From: "J N Hiller" <jnhiller at earthlink.net> 

> Thin Epoxy? I have been using "HOBBYPOXY SMOOTH 'N' EASY" epoxy finishing 
> resin to skin foam wings, spreading it with a scrap balsa squeegee. It has 
> ample working time and is thinner than glue. Is this OK? I have had no 
> problems using it on unsealed skins at about one ounce per 800 square 
> inches. I need to try sealing the skins on my next build. 
> Jim Hiller 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071121/f302df2c/attachment-0001.html 
-------------- next part --------------
An embedded message was scrubbed...
From: "J N Hiller" <jnhiller at earthlink.net>
Subject: [NSRCA-discussion] Epoxy Question
Date: Wed, 21 Nov 2007 19:00:28 +0000
Size: 5271
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071121/f302df2c/attachment-0001.mht