[NSRCA-discussion] Spektrum receiver question

[Ed Alt]

Thanks Jon.  Would you happen to know how the 3rd and 4th remote receiver
get displayed on the data monitor?  For example, with an AR9100, there is a
left and a right remote.  What do they refer to the additional receivers as?
I browsed through the manual and didn't see anything other than left & right
remotes referred to.

 

Quite the honker of a receiver. Might have to get one for my Carden.

 

Thanks

Ed

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
JonLowe at aol.com
Sent: Saturday, November 17, 2007 8:20 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Spektrum receiver question

 

In a message dated 11/17/2007 6:33:53 P.M. Central Standard Time,
ed_alt at hotmail.com writes:

Just wondering if anyone has heard of a Spektrum or JR brand 2.4G receiver
that will allow for a 3rd remote receiver.  I heard that possibly the 12
channel receiver will have that when introduced?

 

Thanks

Ed

There is a new 9 channel receiver that allows for 4 remotes, and has heavy
duty busses for large servos.  Comes with 3 and you can add a fourth:

http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMAR9100

 

The AR9000 comes with two, and allows adding a 3rd.

http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMAR9000

 

Jon Lowe





  _____  

See what's new at AOL.com <http://www.aol.com?NCID=AOLCMP00300000001170>
and Make AOL Your
<http://www.aol.com/mksplash.adp?NCID=AOLCMP00300000001169>  Homepage.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071118/cf0aa8e0/attachment.html