[NSRCA-discussion] Wing Construction

[Lance Van Nostrand]

Foam roller, my friend.  a squeegee will force resin into the pores and away from the joint.  Only a roller applied fast and light can meter the material properly and keep in on the surface.
--Lance

  ----- Original Message ----- 
  From: Nat Penton 
  To: NSRCA Mailing List 
  Sent: Tuesday, November 06, 2007 9:32 PM
  Subject: [NSRCA-discussion] Wing Construction


  To skin a foam core with contest grade balsa does anyone have a preferred way to determine when the amount of epoxy applied is adequate - using Easy Lam epoxy. I have been reluctant to use a squeegie, afraid of scoring the balsa. Would appreciate any comments.                            Nat


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071107/c7cc92a8/attachment.html