[NSRCA-discussion] paint for planes? part 2

[JOddino]

First, don't paint the white.  Use the Comp-arf white touch up and paint the
seams after filling.  About one inch wide and then polish it in with 2000
paper and polishing compound.  Then put on the trim colors with Rustoleum
Professional.  It also is easy to polish so don't worry about imperfect
application of the paint  It goes on very well if you warm the spray cans in
the sun.  The only down side is it takes a long time to really dry so it is
best to let it set a few days before handling, remasking, etc.

Jim O

----- Original Message ----- 
From: "JShulman" <jshulman at cfl.rr.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, May 30, 2007 4:34 PM
Subject: [NSRCA-discussion] paint for planes? part 2


> Since I think my MRC venture is a bust, let me try it this way.
>
> Is there a lightweight spray-can paint that will work for painting on
> fiberglass (Comp-ARF Integral)?
>
> Glow:
> Electric:
>
> Regards,
> Jason
> www.jasonshulman.com
> www.shulmanaviation.com
> www.composite-arf.com
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.472 / Virus Database: 269.8.3/824 - Release Date: 5/29/2007
> 1:01 PM
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion