[NSRCA-discussion] Starter

Anthony Romano anthonyr105 at hotmail.com
Tue Mar 27 17:45:45 AKDT 2007


http://www.pacaeromodel.com/FieldEquipment/PowerPanel/PP.htm

Have bee very happy with the Pacific Aero Starter especially since upgrading 
to 7 cell packs. The bigger cone is a major benefit.

Anthony


>From: vicenterc at comcast.net
>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>,        "NSRCA 
>Mailing List" <nsrca-discussion at lists.nsrca.org>
>CC: JohnL <rcaddict at rcbuzzard.com>
>Subject: Re: [NSRCA-discussion] Starter
>Date: Tue, 27 Mar 2007 23:57:21 +0000
>
>How many cell per car pack?  Looks like 6 per pack so we are using the same 
>voltage.  Sullivan sells a battery holder that fits 12 cells.  Check here:
>
>http://www.sullivanproducts.com/StarterAccessoriesMainFrame.htm
>
>--
>Vicente "Vince" Bortone
>
>-------------- Original message --------------
>From: "JohnL" <rcaddict at rcbuzzard.com>
>
>I'm using an old Sullivan with 2 1500 7.2v car packs very portable and can 
>be charged at the field so far no problem with the extra voltage. It turns 
>everything I have including a 1.8 Moki.
>
>JohnL
>----- Original Message -----
>From: vicenterc at comcast.net
>To: NSRCA Mailing List ; 'NSRCA Mailing List'
>Sent: Tuesday, March 27, 2007 11:21 AM
>Subject: Re: [NSRCA-discussion] Starter
>
>
>Hi Richard,
>
>I am using now the Sullivan Dynatrom with 12 cell NiCad battery pack.  It 
>works great with the OS 160.  I am not sure with the YS 160 but I will know 
>soon.
>
>--
>Vicente "Vince" Bortone
>
>-------------- Original message --------------
>From: "Richard Strickland" <richard.s at allied-callaway.com>
>
>I think some of the starter's power is governed by what battery is behind 
>it.  I've been using an old Sullivan for eons and with a light ni-cad pack 
>it would hardly get out of its own way--strapped to a gel-cell, it has 
>started everything up to a and including a 2C 1.70 with relative ease.
>
>RS
>
>
>-----Original Message-----
>From: nsrca-discussion-bounces at lists.nsrca.org 
>[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Pete Cosky
>Sent: Tuesday, March 27, 2007 9:45 AM
>To: NSRCA Mailing List
>Subject: Re: [NSRCA-discussion] Starter
>
>
>Ron Van Putte turned me on to a Maxx Prod starter a few years ago to 
>replace my Sullivan. It has turned over everything I've put it on up to a 
>1.60 DZ.
>
>E-mail Ron and ask him about them.
>----- Original Message -----
>From: Jay Marshall
>To: NSRCA
>Sent: Tuesday, March 27, 2007 10:39
>Subject: [NSRCA-discussion] Starter
>
>
>I need to replace a starter. It will be used on an OS 140RX, among others. 
>Any suggestions? I looked at a K.... but it said .60 2cy. If you don't want 
>to endorse products on the 'net then please email me direct.
>
>Jay Marshall
>
>
>
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



>From: "JohnL" <rcaddict at rcbuzzard.com>
>To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>Subject: Re: [NSRCA-discussion] Starter
>Date: Tue, 27 Mar 2007 21:14:52 +0000
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion






>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_________________________________________________________________
Get a FREE Web site, company branded e-mail and more from Microsoft Office 
Live! http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/



More information about the NSRCA-discussion mailing list