[NSRCA-discussion] Judging question on turnaround maneuvers

[Del K. Rykert]

That is correct and deciding factor is where you start your 1st radius before running out of box. 
 
    Del
  ----- Original Message ----- 
  From: Bob Richards 
  To: NSRCA Mailing List 
  Sent: Sunday, March 18, 2007 9:40 AM
  Subject: Re: [NSRCA-discussion] Judging question on turnaround maneuvers


  Since all the looping segments have to be the same radius, and the straight segment must be at a 45 degree angle, I think the only way to make an altitude adjustment is to vary the length of the straight line. The roll must be centered on that segment.

  Bob R.


  Adrien L Terrenoire <amad2terry at juno.com> wrote:
    The 1/2 roll should be in the middle of the line!! You make the altitude
    adj by varying the size of the loop segment.

    Terry T.

    On Sat, 17 Mar 2007 18:24:31 -0500 "Paul Horan"
    writes:
    > Turn around maneuvers are altitude adjusting maneuvers.
    > In that case how is a half cuban or reverse half cuban judges ? 
    > Normally the half roll is in line with the center of the loop 
    > and the straight segment it is in. Where should the half roll be 
    > located when the half cuban is used to adjust height, at the 
    > center of the straight or at the center of the loop ?
    > Thanks,
    > Paul 
    > 
    > _______________________________________________
    > NSRCA-discussion mailing list
    > NSRCA-discussion at lists.nsrca.org
    > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
    > 
    > 

    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion





------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070318/ebdbd289/attachment.html