[NSRCA-discussion] Judging question on turnaround maneuvers

[Don Ramsey]

Paul,

To adjust altitude, adjust the entry radius and the length of the 45 degree 
line to accomplish what you want.  Remember, the entry radius and the radius 
of the 5/8 loop must be the same and the roll must be in the center of the 
line.

Don


----- Original Message ----- 
From: "Paul Horan" <paul.horan at sbcglobal.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, March 17, 2007 6:24 PM
Subject: [NSRCA-discussion] Judging question on turnaround maneuvers


>    Turn around maneuvers are altitude adjusting maneuvers.
>    In that case how is a half cuban or reverse half cuban judges ? 
> Normally the half roll is in line with the center of the loop
> and the straight segment it is in.  Where should the half roll be located 
> when the half cuban is used to adjust height,   at the
> center of the straight or at the center of the loop ?
> Thanks,
> Paul
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion