[NSRCA-discussion] Best/Cheapest source of Titanium Screws

[Adam Glatt]

Here's a better selection of individual sizes:
http://shopping.rcmodel.hk/advanced_search_result.php?keywords=titanium%20screw&sort=2a&page=2

Also:
http://www.speedtechrc.com/store/ebsearch.asp
search for titanium
Lots of listings.  Check out, for instance, the Speed Tech R/C Light 
Weight Button Head Titanium Screw (5 Pack).  Inside that listing you 
have options of 3x6, 3x6, 3x8, 3x10, 3x12 metric Ti screws.

-Adam

Adam Glatt wrote:
> Woops, turns out they only have stainless screws.  The titaniums are 
> harder to find.  You can find quite a few here:
>
> http://rc-mushroom.com/advanced_search.php
> search for titanium
> I recommend sorting by decreasing price
>
> Big sets start at big money, and if you keep going through the results 
> you'll get to a few smaller sets.  The real trick is finding out which 
> of those sets have the screws you need.  This is probably a Plan E.
>
> -Adam
>
> Adam Glatt wrote:
>   
>> Jim, http://rcscrewz.com/ is popular with the car guys.
>> -Adam
>>
>> Jim Woodward wrote:
>>   
>>     
>>> Thanks Jay.  I found each of those manufactures, and there was no 
>>> information readily available regarding pricing. 
>>>
>>> Jim
>>>
>>>  
>>>
>>> ------------------------------------------------------------------------
>>>
>>> *From:* nsrca-discussion-bounces at lists.nsrca.org 
>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Jay 
>>> Marshall
>>> *Sent:* Wednesday, March 14, 2007 11:10 AM
>>> *To:* 'NSRCA Mailing List'
>>> *Subject:* Re: [NSRCA-discussion] Best/Cheapest source of Titanium Screws
>>>
>>>  
>>>
>>> Have you tried http://www.titaniumscrew.com/?
>>>
>>>  
>>>
>>> -----Original Message-----
>>> *From:* nsrca-discussion-bounces at lists.nsrca.org 
>>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Jim 
>>> Woodward
>>> *Sent:* Wednesday, March 14, 2007 10:54 AM
>>> *To:* NSRCA Mailing List
>>> *Subject:* [NSRCA-discussion] Best/Cheapest source of Titanium Screws
>>>
>>>  
>>>
>>> Hi Guys,
>>>
>>>  
>>>
>>> Does anyone have a nice/cheap source of titanium screws?  I checked 
>>> with United Titanium for 4-40, 6/32, and 8/32 screws.  Because they 
>>> were machined screws, the price was $6.00 - $8.00 per fastener.
>>>
>>>  
>>>
>>> Thanks,
>>>
>>> Jim W.
>>>
>>>  
>>>
>>>  
>>>
>>> CONFIDENTIALITY NOTICE: This e-mail message, including any 
>>> attachments, is for the sole use of the intended recipient(s) and may 
>>> contain confidential and proprietary information.  Any unauthorized 
>>> review, use, disclosure or distribution is prohibited.  If you are not 
>>> the intended recipient(s), please contact the sender by reply e-mail 
>>> and destroy all copies of the original message.
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>   
>>>     
>>>       
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>   
>>     
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>