[NSRCA-discussion] Focus II Landing Gear crack

jivey61 at bellsouth.net jivey61 at bellsouth.net
Sun Mar 11 17:50:32 AKST 2007


Bob
That is correct.    My gear was completely separated at the break and that worked. Didn't look good but worked good.

Jim Ivey
  ----- Original Message ----- 
  From: Bob Harden 
  To: NSRCA Mailing List 
  Sent: Sunday, March 11, 2007 7:30 PM
  Subject: Re: [NSRCA-discussion] Focus II Landing Gear crack


  Jim,

  Thanks for the advice.  I didn't think about using CA to repair it.  I think you are saying to clamp it back together and then use thin CA to wick into the fibers to set a repair?  Is this correct.

  Thanks,
  Bob
    ----- Original Message ----- 
    From: jivey61 at bellsouth.net 
    To: NSRCA Mailing List 
    Sent: Sunday, March 11, 2007 7:33 PM
    Subject: Re: [NSRCA-discussion] Focus II Landing Gear crack


    Bob
     The Focus gear is made of molded stringy fiberglass.I broke mine several years ago and had to fix at the field(contest). I made the stringy break... jam back together and soaked it with thin CA.The CA was absorbed into the fiberglass and the gear was fixed.I used the gear for a long time after that. If yours is just a crack you could do the same thing. Open the crack if you can and soak in CA. The reason the gear is 2 pieces is the way it mounts into the fuse.If it was one piece I think it would tear up more fuse in a hard landing.

    Jim Ivey
      ----- Original Message ----- 
      From: Bob Harden 
      To: NSRCA Mailing List 
      Sent: Sunday, March 11, 2007 1:56 PM
      Subject: [NSRCA-discussion] Focus II Landing Gear crack


      Hello all,

      The left side of my Focus II landing gear has cracked and I thinking of getting replacement gear.  The Focus gear are in two parts; a left half and a right half. The particular gear I have is a white color; not sure just what it is made of.  I see on the Piedmont web site that there is a black colored gear which might be carbon fiber?   I am wondering if others have noted cracking in their Focus landing gear and what is being done about replacement?  It seems to me a single gear would be better than a two halves gear.  What is the membership experience?

      Bob Harden


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070312/a9c4d874/attachment.html 


More information about the NSRCA-discussion mailing list