[NSRCA-discussion] NMP header and 821/699 pipe

[Michael Wickizer]

Tim:

I am using the NMP header w/ the Hatori 821 pipe.  All that is required is 
replacing the O-ring in the pipe with Central Hobbies' O-ring which has a 
slightly smaller ID.  Pipe and header fit directly together with a snug fit, 
no leaks.  Makes for a great set-up.

Mike Wickizer


>From: Tim Taylor <timsautopro at yahoo.com>
>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>To: nsrca-discussion at lists.nsrca.org
>Subject: [NSRCA-discussion] NMP header and 821/699 pipe
>Date: Mon, 5 Mar 2007 17:24:15 -0800 (PST)
>
>After breaking a couple of headers (791) I was wondering if the NMP header 
>is a direct replacement header for this pipe? Does one have to add 
>something between the two? Does the ribs on the NMP need to be machined 
>off? Thanks
>
>   Tim D2
>
>
>---------------------------------
>Now that's room service! Choose from over 150,000 hotels
>in 45,000 destinations on Yahoo! Travel to find your fit.


>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion