[NSRCA-discussion] landing gear or prop for Focus II

[Dean Pappas]

Hi Terry,
Which motor is he going to use, and what is the Kv of the motor in RPM/Volt. That will mostly dictate prop size.
Then you can make thew decision to use the long Bolly or ES gear, or even make your own.
Dean 

Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com


-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Adrien L
Terrenoire
Sent: Sunday, March 04, 2007 12:14 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] landing gear or prop for Focus II


A fellow club member is working on a Focus 2 and is converting it to
electric. The system calls for a 22" prop, and there is not enough
clearance! Has anyone found longer gear, or a better prop alternative?

Terry T.
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion