[NSRCA-discussion] Left Hand 4-40 Tap

[Bryan Kennedy]

Jerry

You might try a local Machinist supply, one that sells tooling for
mills, lathes etc. They might be able to help.

Bryan
AMA 1744
NSRCA 1744
Team Kennedy

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jerry
Budd
Sent: Tuesday, June 19, 2007 10:56 AM
To: nsrca-discussion at lists.nsrca.org
Cc: dist7 at nsrca.org
Subject: [NSRCA-discussion] Left Hand 4-40 Tap

Hi all,

Any suggestions on where to purchase a left hand thread 4-40 tap? 
(for tapping nylon clevises to match the 4-40 titanium turnbuckles).

I was surprised to find that McMaster-Carr doesn't carry it.

Thx, Jerry
-- 
___________
Jerry Budd
Budd Engineering
(661) 722-5669 Voice/Fax
(661) 435-0358 Cell Phone
mailto:jerry at buddengineering.com
http://www.buddengineering.com
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion