[NSRCA-discussion] parts for 140FZ

[Ken Thompson]

Thank you Eric, however, Bob Kane just put one in the mail to me this morning.

Again, thanks for the offer!!!
  ----- Original Message ----- 
  From: Grow Pattern 
  To: NSRCA Mailing List 
  Sent: Friday, June 08, 2007 6:42 AM
  Subject: Re: [NSRCA-discussion] parts for 140FZ


  I have several. $10 which would include the postage would cover it.

  Regards,

  Eric.
    ----- Original Message ----- 
    From: Ken Thompson 
    To: NSRCA-discussion at lists.nsrca.org 
    Sent: Thursday, June 07, 2007 2:25 PM
    Subject: [NSRCA-discussion] parts for 140FZ


    Hi folks,

    I have a YS 140FZ that lost the retaining screw for the carb barrel.  In flying the plane the carb barrel and/or carb body has some damage, not sure what happened, but the barrel is pretty stiff when in the proper position.  I tried to sand the interior of the body and the outside of the barrel with 320 grit sandpaper, but I can't get it to smooth out, and there are no noticable burrs or issues.

    Does anyone have a spare barrel and body they would be willing to part with, relatively inexpensively?

    TIA,

    Ken Thompson


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070608/e27655a6/attachment.html