[NSRCA-discussion] parts for 140FZ

[Pete Cosky]

Make sure  the carb body is not overtightened tot eh engine case and that the bolts are pretty equal in torque. I had that exact same issue last year on a 1.40L. It was the carb body being warped by the mounting bolts.
  ----- Original Message ----- 
  From: Ken Thompson 
  To: NSRCA-discussion at lists.nsrca.org 
  Sent: Thursday, June 07, 2007 2:25
  Subject: [NSRCA-discussion] parts for 140FZ


  Hi folks,

  I have a YS 140FZ that lost the retaining screw for the carb barrel.  In flying the plane the carb barrel and/or carb body has some damage, not sure what happened, but the barrel is pretty stiff when in the proper position.  I tried to sand the interior of the body and the outside of the barrel with 320 grit sandpaper, but I can't get it to smooth out, and there are no noticable burrs or issues.

  Does anyone have a spare barrel and body they would be willing to part with, relatively inexpensively?

  TIA,

  Ken Thompson


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070607/32dc920d/attachment.html