[NSRCA-discussion] Fuel Line Pressure

k6xyz k6xyz at sbcglobal.net
Fri Jul 20 18:37:51 AKDT 2007


YS 4 strokes pressurize the tank to about 9psi. 

I measured the tank pressure with a T and a meter.

So, I guess this means that the fuel feed line is 9psi as well.

 

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok. 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Brian
Billings
Sent: Friday, July 20, 2007 7:41 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Fuel Line Pressure

 

Never tried this but I read about it and meant to try. Just tee the line
going to the carb and run a piece of fuel line up a stick, wall or what ever
with the top of the line left open, start engine and see how far up the line
it goes. This won't give a specific PSI measurement but it sounds like a
good way to get a reference to analyze or adjust with. 

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jay Marshall
Sent: Friday, July 20, 2007 6:19 PM
To: NSRCA
Subject: [NSRCA-discussion] Fuel Line Pressure

 

Does anyone know what the nominal fuel line pressures are in .45 - 1.60 size
engines is? Is there a known source for a measuring gauge?

 

 

Jay Marshall 

 


Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.9.10/876 - Release Date: 6/28/2007
10:56 AM



Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.9.10/876 - Release Date: 6/28/2007
10:56 AM


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070721/9d1cb506/attachment.html 


More information about the NSRCA-discussion mailing list