[NSRCA-discussion] Expert Electronics' F650 Negative shift RX

[MKMSG]

Jim:  Are you saying the 9Z with Synth module will work with the Berg DSP receivers?  When I asked Castle Creations, they said it would not.

Mike M
  ----- Original Message ----- 
  From: J.Oddino 
  To: NSRCA Mailing List 
  Sent: Wednesday, January 31, 2007 5:09 PM
  Subject: Re: [NSRCA-discussion] Expert Electronics' F650 Negative shift RX


  I'm pretty sure it won't work.  The sync pulse is the wrong polarity with respect to the servo position pulses in the 9Z.  Just inverting it won't work.  I can't imagine why they did that.  Interestingly enough, the Berg receiver figured it out.

  Jim O
    ----- Original Message ----- 
    From: Dean Pappas 
    To: NSRCA Mailing List 
    Sent: Wednesday, January 31, 2007 2:11 PM
    Subject: Re: [NSRCA-discussion] Expert Electronics' F650 Negative shift RX


    Hello Incheol,
    I assume that the F650 does not work with the synthesized 9Z TX module.
    Try it with a non-synthesized module and it will almost certainly work.
    This would not be the first RX to show this "feature".
    I am told (though I have never tried this) that if you unplug then re-plug the 9Zsynthesizer module
    while the TX is powered up that those same  RX es will work with the 9ZS module.
    All the best,
    Dean

    Dean Pappas 
    Sr. Design Engineer 
    Kodeos Communications 
    111 Corporate Blvd. 
    South Plainfield, N.J. 07080 
    (908) 222-7817 phone 
    (908) 222-2392 fax 
    d.pappas at kodeos.com 

      -----Original Message-----
      From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Park, Ihncheol
      Sent: Wednesday, January 31, 2007 3:48 PM
      To: 'NSRCA Mailing List'
      Subject: [NSRCA-discussion] Expert Electronics' F650 Negative shift RX


      Has anyone tried Expert Electronics' F650 (Horizon part number EXRR6501) with Futaba or Hitec transmitter(s)?
      This is JR Propo's R610 receiver in negative shift.  Very good and cheap receiver.

      So far, it works good with Hitec Eclipse.  It does not work with Futaba 9Z on PPM.
      Apparently Horizon did not know until today that this receiver does not work with 9Z.
      If anyone tried them, would you please let me know?
      Thank you,

      Ihncheol Park
      P & A Hobbies


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 


----------------------------------------------------------------------------


    No virus found in this incoming message.
    Checked by AVG Free Edition.
    Version: 7.5.432 / Virus Database: 268.17.18/662 - Release Date: 1/31/2007 3:16 PM



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070131/b78e947f/attachment-0001.html