[NSRCA-discussion] Soft mount for OS .46AX?

[vicenterc at comcast.net]

Tom,

I just found the one that Sullivan makes.  I used the 40 size long ago in a trainer that I flew long time with my two sons.  I never had problems.  Looks like you need the S275.  Check this link

http://www.sullivanproducts.com/MotorMountsMainFrame.htm

Vince

-------------- Original message -------------- 
From: "Dean Pappas" <d.pappas at kodeos.com> 

> Hi Tom, 
> It's quite light, and the Sport-Tabs mount is even lighter. 
> The rubber bits attach to four small aluminum tabs that tighten under the 
> backplate screws. 
> These two mounts and the Sullivan backplate are probably the ones we should 
> first be recommending to Sport folk 
> when they say they want to get quiet without spending big bucks. 
> 
> Dean Pappas 
> Sr. Design Engineer 
> Kodeos Communications 
> 111 Corporate Blvd. 
> South Plainfield, N.J. 07080 
> (908) 222-7817 phone 
> (908) 222-2392 fax 
> d.pappas at kodeos.com 
> 
> 
> -----Original Message----- 
> From: nsrca-discussion-bounces at lists.nsrca.org 
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Tom Simes 
> Sent: Tuesday, January 30, 2007 10:57 AM 
> To: NSRCA Mailing List 
> Subject: Re: [NSRCA-discussion] Soft mount for OS .46AX? 
> 
> 
> On Tue, 30 Jan 2007 09:03:03 -0500 
> rcmaster199 at aol.com wrote: 
> 
> > Tom, 
> > 
> > Another possibility is to make a Hyde type mount yourself from 3/32" 
> > aircraft ply, balsa and rubber bicycle innertube. It's very easy to 
> > make and would be the lightest and most effective solution for you. 
> > The whole thing is put together with ca glue. 
> 
> Thanks for all the answers guys! Matt, what you're describing sounds a 
> bit like the instructions that Bob Pastorello put together for a 
> PastoMount: 
> 
> http://www.rcaerobats.net/mount1.htm 
> 
> If your version doesn't require a nose ring, I'm interested! 
> 
> Vince, I couldn't find a Hyde or Budd mount that fit. I doubt either 
> one of them has idle time to make what would amount to a one off. Now 
> if the list did a group Reactor build... ;-) 
> 
> Ron, you are right on - the mount I have on my Somethin' Extra is a 
> Sullivan backplate mount and not a K&B. My first option may be to find 
> one of those. The one on the Somethin' Extra has served well - and it 
> is a very light mount. 
> 
> Dean, I'm going to take a look at the Dave Brown mount - it sounds just 
> a shade heavier but if it's in current production that sure beats the 
> Sullivan. 
> 
> 
> Tom 
> 
> ====================================================================== 
> "Z-80 system stack overflow. Shut 'er down Scotty, the system's 
> sucking mud" - Error message on TRS 80 Model-16B 
> 
> Tom Simes simestd at netexpress.com 
> ====================================================================== 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
> 
> _______________________________________________ 
> NSRCA-discussion mailing list 
> NSRCA-discussion at lists.nsrca.org 
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070130/5983bd20/attachment.html