[NSRCA-discussion] servo support

[george w. kennie]

Boy, that looks even more positive than the JR type that I've been using for years. Good stuff Rex !
G.



  ----- Original Message ----- 
  From: Rex LESHER 
  To: NSRCA Mailing List 
  Sent: Saturday, January 13, 2007 6:05 PM
  Subject: Re: [NSRCA-discussion] servo support


  Here's two more, of a different variety....   one for Futaba, one for JR servos.
  http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=4DRCF  for Futaba servos....

  http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=4DRCJ   for JR servos....

  These are a little different, but they have lots of neat parts on them...   If the standard JR support has changed and did away with the 
  metal frame, these might be better for our use....  

  Rex


    ----- Original Message ----- 
    From: JFGREEN 
    To: 'NSRCA Mailing List' 
    Sent: Saturday, January 13, 2007 2:45 PM
    Subject: [NSRCA-discussion] servo support


    Does anyone know anyone other  than Horizon that might carry the KS servo support.  Horizon is out of them – Jerry green



    --
    No virus found in this outgoing message.
    Checked by AVG Free Edition.
    Version: 7.1.410 / Virus Database: 268.16.10/625 - Release Date: 1/13/2007


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070114/3325c6a0/attachment.html