[NSRCA-discussion] Lasers

[Rex LESHER]

I'm plumb worried about you!!!  An engineer with a new toy?  
I have to confess...  I bought one of those rotating lasers...  accurate to 1/8 inch at 100'...   I tried watching
it go around and around...  I found out that I actually have to move my feet to do it.  Unfortunately, it took 
three revolutions before I figured it out!!!

Rex Lesher
Team Alieve
Team Advil
  ----- Original Message ----- 
  From: Dennis<mailto:patternpilot at verizon.net> 
  To: 'NSRCA Mailing List'<mailto:nsrca-discussion at lists.nsrca.org> 
  Sent: Tuesday, January 09, 2007 1:41 PM
  Subject: Re: [NSRCA-discussion] Lasers


  You had better watch it Rex. Now I can tell when you are on the level.

   

  Dennis

   


------------------------------------------------------------------------------

  From: nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-discussion-bounces at lists.nsrca.org> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Rex LESHER
  Sent: Monday, January 08, 2007 10:26 PM
  To: NSRCA Mailing List
  Subject: Re: [NSRCA-discussion] Lasers

   

  Wow, that's a good deal!!!!   Now you just have to get your butt in gear and use it!!!!  LOL

   

  Rex

    ----- Original Message ----- 

    From: Dennis<mailto:patternpilot at verizon.net> 

    To: NSRCA Mailing List<mailto:nsrca-discussion at lists.nsrca.org> 

    Sent: Monday, January 08, 2007 10:15 PM

    Subject: Re: [NSRCA-discussion] Lasers

     

    I got my Bushnell on EBay for just under $13.00 including shipping. Took two day's to get.

     

    Dennis Cone 

     

    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-discussion-bounces at lists.nsrca.org> [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of vicenterc at comcast.net<mailto:vicenterc at comcast.net>
    Sent: Monday, January 08, 2007 2:13 PM
    To: NSRCA Mailing List; 'NSRCA Mailing List'
    Subject: Re: [NSRCA-discussion] Lasers

     

    Where are you buying this?

     

    Vicente "Vince" Bortone

     

    -------------- Original message -------------- 
    From: "Scott Smith" <js.smith at verizon.net> 




    I got mine this weekend too!  Worked well to verify everything was aligned correctly.  I also used to locate where the rudder cable would exit the fuse and that worked very well.  Well worth $20!

     

    (plane is upside down, anhedral stab)



     

    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of wgalligan
    Sent: Monday, January 08, 2007 9:22 AM
    To: NSRCA Mailing List
    Subject: Re: [NSRCA-discussion] Lasers

     

    I just got my Bushnell laser level over the weekend.  It was about 12 bucks

    plus 7 bucks shipping.  It is a nice unit for the money. I'll put it to use

    this week setting the stab on my Inspire.

     

    Wayne Galligan

    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070110/1fce8264/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 10407 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070110/1fce8264/attachment.jpe