[NSRCA-discussion] Monokote on Monokote

[k6xyz]

Ok....I didn't know it was window cleaner.....I have plenty of windex
though...heh.
As long as it works better I'll get some...mebby I'll clean the windows
too....or not!

Hey...are you going to the NATS again?
If so, mebby we can do it again and you can stay longer.

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Lynn Burks
Sent: Tuesday, February 20, 2007 11:09 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Monokote on Monokote

Hey old partner:  Yes Cinch a product of Proctor and Gamble ( window 
cleaner) it seems to attach the monokote glue a little better.  Lynn

k6xyz wrote:
> Hi Lynn....great to hear from you again!
> I've never heard of that stuff but I'll keep it in mind.
> Hopefully, the cold weather is done.....I've had enough of that for
> awhile...a LONG while.
>
>
> Regards
>
> Dave Harmon
> NSRCA 586
> K6XYZ[at]sbcglobal[dot]net
> Sperry, Ok.
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Lynn Burks
> Sent: Monday, February 19, 2007 10:01 AM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] Monokote on Monokote
>
> Hey Dave: I have used Cinch ( in orange bottle) with good results. Is it 
> warming up back there yet. Lynn
>
> k6xyz wrote:
>   
>> I have a bottle of some kind of liquid to attach MK over MK but I've 
>> never tried it.
>>
>> Has anyone used it and how did you like it?
>>
>> Regards
>>
>> Dave Harmon
>> NSRCA 586
>> K6XYZ[at]sbcglobal[dot]net
>> Sperry, Ok.
>>
>> -----Original Message-----
>> *From:* nsrca-discussion-bounces at lists.nsrca.org 
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Mark 
>> Atwood
>> *Sent:* Sunday, February 18, 2007 2:04 PM
>> *To:* NSRCA Mailing List
>> *Subject:* Re: [NSRCA-discussion] Monokote on Monokote
>>
>> Can it be too cold to build???
>>
>> Windex is definitely the best of those three. I've had very good 
>> results with even semi large pieces (maybe 4" wide...anything wider 
>> and I'll typically only do one layer). Don't skimp on the windex. Both 
>> layers of monokote have to be clean...any dust will show up as a bump 
>> under the film. I coat both the piece I'm putting down, as well as the 
>> surface I'm putting it on, with a brush. Spraying it doesn't get 
>> enough on (unless you go crazy) and just creates a million air bubbles 
>> rather than a smooth film of liquid. I have it sloppy wet...then slide 
>> the pieces into position, and I use a small 4" shower squeegee to 
>> squeeze the windex out. You'll have zero bubbles...and it will adhere 
>> from suction pretty aggressively. Yes...you'll have a wet mess so a 
>> few paper towels are in order. Wait at least 24 hours and then use an 
>> iron set just warm enough to anchor Monokote to Monokote without any 
>> shrinking.
>>
>> If you heat it too soon (same day) there's enough moisture still 
>> trapped between the two layers that you'll vaporize it and cause a 
>> bazillion bubbles.
>>
>> -Mark
>>
>>
>> On 2/18/07 12:55 PM, "Ed White" <edvwhite at sbcglobal.net> wrote:
>>
>> OK, Question for those finding it too cold to build. Is it possible to 
>> put monokote on top of monokote and get decent results? Tried the poke 
>> holes and windex/soap methods and not impressed with the results. Any 
>> other ideas?
>>
>> Ed
>>
>> */ORLANDO FRETS <ojfrets at earthlink.net>/* wrote:
>>
>>
>> Temperature in low 30's. It's cold! It's also too cold to build, shop 
>> is cold. Stay inside where it's warm.
>>
>>
>>
>>
>> ORLANDO FRETS
>>
>> ojfrets at earthlink.net
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>     
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>   
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion