[NSRCA-discussion] low profile JR servo?

[Earl Haury]

Isn't technology great - $2000+ TX and $100+ servos with everything riding on a 50 cent pot on each end! 

Earl
  ----- Original Message ----- 
  From: Bob Richards 
  To: NSRCA Mailing List 
  Sent: Tuesday, February 20, 2007 8:37 PM
  Subject: Re: [NSRCA-discussion] low profile JR servo?


  When you say analog, I assume you are talking about the feedback loop? I wonder how long it will be until we get shaft encoders in our servos. Or, for that matter, the shaft encoder could be mounted to the control surface itself.

  Bob R.


  "J.Oddino" <joddino at socal.rr.com> wrote:
    Correct.  Well kind of.  Actually all of our servos are analog but you are right, the super servos used the same principles as our modern "digital" servos.

    Jim O
      ----- Original Message ----- 
      From: Bob Richards 
      To: NSRCA Mailing List 
      Sent: Tuesday, February 20, 2007 1:22 PM
      Subject: Re: [NSRCA-discussion] low profile JR servo?


      I was under the impression that the "Super Servos" were actually first generation digital servos. Is that not correct?

      Bob R.


       


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070221/17fd7bd9/attachment.html