[NSRCA-discussion] low profile JR servo?

[J.Oddino]

Correct.  Well kind of.  Actually all of our servos are analog but you are right, the super servos used the same principles as our modern "digital" servos.

Jim O
  ----- Original Message ----- 
  From: Bob Richards 
  To: NSRCA Mailing List 
  Sent: Tuesday, February 20, 2007 1:22 PM
  Subject: Re: [NSRCA-discussion] low profile JR servo?


  I was under the impression that the "Super Servos" were actually first generation digital servos. Is that not correct?

  Bob R.


  From: Anthony Abdullah <aabdu at sbcglobal.net>
  To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
  Subject: Re: [NSRCA-discussion] low profile JR servo?
  Date: Tue, 20 Feb 2007 11:05:53 -0800 (PST)

  I have used the coreless 7000 series super servos (both the 7000 and 7005) for years with very good results. Even though they are not digital they are very accurate and seem to have good holding power. 



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.441 / Virus Database: 268.18.3/694 - Release Date: 2/20/2007 1:44 PM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070221/12b772fc/attachment.html