[NSRCA-discussion] Hobby-friendly machine shop

[Scott Anderson]

Jim,

Contact me off list I have a cnc table..

scott at rcfoamy.com

scott anderson
----- Original Message ----- 
From: "Jim Woodward" <Jim.Woodward at armorholdings.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, February 14, 2007 4:31 PM
Subject: Re: [NSRCA-discussion] Hobby-friendly machine shop


> Hi Guys,
>
> Does anyone happen to know a hobby-friendly machine shop, or have a good
> & inexpensive source for CNC parts in low quantities?
>
> Thanks,
> Jim W.
>
> CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is 
> for the sole use of the intended recipient(s) and may contain confidential 
> and proprietary information.  Any unauthorized review, use, disclosure or 
> distribution is prohibited.  If you are not the intended recipient(s), 
> please contact the sender by reply e-mail and destroy all copies of the 
> original message.
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>