[NSRCA-discussion] Vacuum Bagging

[Jay Marshall]

Thanks loads to all. The low cost APC system is the one I was looking at,
and from your inputs it looks like it will do the job.

 

Jay Marshall 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Nat Penton
Sent: Sunday, December 23, 2007 5:29 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Vacuum Bagging

 

Jay

I vote with Verne. Buy the cheapie system ACP sells if you plan to use .7 to
1.5# foam. It pulls the right vac ( about 6 in. hg. or 5 psi ) without a
pressure regulator. It is very convenient to use.         

 

If you have questions holler.              Nat

----- Original Message ----- 

From: Jay Marshall <mailto:lightfoot at sc.rr.com>  

To: nsrca-discussion at lists.nsrca.org 

Sent: Sunday, December 23, 2007 10:46 AM

Subject: [NSRCA-discussion] Vacuum Bagging

 

I am thinking of buying a vacuum bagging system. What is the recommend
vacuum for sheeting a foam core wing? Any tips or info sources?

 

Jay Marshall 

 


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071223/9e2a8430/attachment.html