[NSRCA-discussion] Futaba and pattern

[Verne Koester]

I'm not entirely convinced Andrew even HAS springs on his gimbals  ;>)

Verne
  ----- Original Message ----- 
  From: JShulman 
  To: NSRCA Mailing List 
  Sent: Wednesday, December 19, 2007 8:10 PM
  Subject: Re: [NSRCA-discussion] Futaba and pattern


  Verne, check Andrew's 7C 2.4 when he gets it. The springs in that Tx are pretty tight compared to every other radio. Probably so much so that he will need softer springs...lol.

  Regards,
  Jason
  www.jasonshulman.com
  www.shulmanaviation.com
  www.composite-arf.com 

    -----Original Message-----
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Verne Koester
    Sent: Wednesday, December 19, 2007 8:07 PM
    To: NSRCA Mailing List
    Subject: Re: [NSRCA-discussion] Futaba and pattern


    Stiff gimbal springs for the high end radios that are actually stiff.

    Verne
      ----- Original Message ----- 
      From: Derek Koopowitz 
      To: NSRCA Mailing List 
      Sent: Wednesday, December 19, 2007 5:17 PM
      Subject: [NSRCA-discussion] Futaba and pattern


      Futaba is looking for some new product ideas for upcoming equipment and they are interested in seeing what ideas we all have for the pattern arena that could be new and inventive.  This could be anything from updating current equipment to new product development. 

      If you could put some thoughts together in an email to me, I'll make sure that they're sent to Futaba USA's attention.   I'll need to have this back no later than the end of the year!

      Thanks!


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071220/e31edab4/attachment.html